Below are firmware images for the Linksys WAP11.

If you have a HW Revision 1.0 WAP11, I recommend going with SMC's 1.4g7 build.

If you have a HW Revision 1.1 WAP11, I recommend going with Linksys's 1.4h3 build.

To update, take the newest updater Linksys provides, and move the .rom they give you
to a .old file. Then, copy one of the rom's below to the name of that file, run the
updater. If it fails after 2% or so, try again. It will fail after 50% or so, which
is normal, but the device should have really been updated. After any firmware revision
change on the WAP11, I highly recommend blowing away the config and starting from
scratch.

If you have any issues, please contact me at natecars@natecarlson.com. Thanks!

FILENAME	DESCRIPTION
--------	-----------
AP14g7.rom	SMC 2655W Firmware v1.4g7 (works fine on WAP11)
bridge13k1.rom	WAP11 Firmware v1.3k1 (from Linksys WAP11 v1.4h3 updater)
bridge14g5.rom	WAP11 Firmware v1.4g5 (from Linksys WAP11 v1.4h3 updater)
bridge14g8.rom	WAP11 Firmware v1.4g8 (from Linksys WAP11 v1.4h3 updater)
bridge14h3.rom	WAP11 Firmware v1.4h3 (from Linksys WAP11 v1.4h3 updater)
bridge14h9.rom	WAP11 Firmware v1.4h9 (from Linksys WAP11 v1.4i1 updater)
bridge14i1.rom	WAP11 Firmware v1.4i1 (from Linksys WAP11 v1.4i1 updater)